Slit Coil

Slit Coil
Since 1945 Tempel has been dedicated to providing customers with only the finest quality steel. As one of the world's largest buyers of electrical steel, Tempel always has large volumes on hand, including prime slit coils and cut to length sheets. Meeting the needs of any size company, Tempel helps customers with orders ranging from single coils to millions of pounds of laminated steel.

Steel Sales orders are processed quickly and professionally allowing for complete customer satisfaction.

Our Tempel Technical Team, which consists of the Marketing, Engineering, and Quality Assurance departments, helps companies to meet specific needs and requirements. They begin by looking at what the customer needs and then determine the appropriate material for the application.

Coils of steel processed by Tempel routinely undergo complete performance testing before it is accepted for shipment or acceptance into inventory.

Steel processing by Tempel exceeds two million pounds a day. For customers of the Steel Services Group, this means customers' needs can usually be met due to our large inventory of steel. Orders may be made up of combinations of both electrical and non-electrical steel.

Orders are securely banded on plastic or wood pallets, and then wrapped with rust inhibiting plastic VCI paper. The steel is then packed with desiccants and covered with plastic to ensure maximum protection.

Each coil of steel carries a bar coded inventory card and a computer generated material identification label. The label provides the coil's width, gauge, grade, Tempel process designation and all other order information. The information included on this label will allow us to trace the material back to the acceptance testing data and mill certifications.

The follow types of steel offered for sale by our Steel Sales group:

Lamination Grade:

  • Cold Rolled Steel
  • Non-oriented Silicon
  • Grain Oriented Silicon
  • Motor Lamination Steel
  • Fully Processed
  • Semi-Processed
  • Full Hard
  • Silicon Bronze
  • Cold Rolled Commercial Quality
  • Drawing Quality

Product Specifications:

Dimensional Range
  • Slitting Width: 0.500" (12.7mm) - 50.000" (1,270mm)
  • Sheet Sizes: Up to 50.000" (1,270 mm) Width by Length
  • Steel Thickness: 30 Gauge 0.0110" (0.279mm) to 14 Gauge 0.0781" (1.984mm)
  • Inside Diameter: 20" * 508mm
  • Outside Diameter: 60" (Maximum) 1,524mm
  • Max. Weight per coil: 20,000 Pounds
  • Max. Weight per skid: 10,000 Pounds

* Inside diameters of less than 20" can distort electrical steel and are not recommended by Tempel quality standards.

Performance Options:

  • Electrical Steel Grades: M4-M64 and above
  • Surface Insulation: C0, C2, C3, C4, C5, C6, Anti-Stick
  • Annealing: Continuous Roller Hearth, in a Hydrogen-Nitrogen Protective Atmosphere

If a product or service is not listed that you want to buy, please contact our Tempel Steel Services Group, and they will assist you with any further questions.


Tempel Steel Home